Raymarine CP370 CLEARPULSE SONAR MODULE
Home / Equipment catalogue / Fishfinders & Sonar / Raymarine CP370 CLEARPULSE SONAR MODULE
Raymarine · Code E70297
Units sonar · Bottom imaging · Fish detection
Fishfinders & Sonar
CP370 — side view of unit sonar
Image: Raymarine
Discover the product
The CP370 is a networked dual-frequency 50/200 kHz ClearPulse sonar module, with output up to 1 kW RMS. It connects to a compatible Raymarine display over RayNet and operates on 12 or 24 V. A suitable transducer is required for the desired power, frequency and hull; actual operating depth depends on the transducer and conditions.
Compatible equipment
Documented connections for specific catalogue codes, including parts, requirements and manufacturer sources. Selected equipment ranges are covered; an unlisted combination does not imply incompatibility. Each connection path is assessed separately and is not a complete installation design.
2 documented connections · Sources checked: 2026-10-11
Explore connections, components & diagrams ↗
Equipment connection guide ↗
CP370 CLEARPULSE SONAR MODULE · E70297
Axiom 2 RV · Direct
NETWORK · Gigabit RayNet
Included with E70297:1 × A62361 — Raynet (F) to Raynet (F) cable - 2m
Functions: Conventional sonar up to 1 kW through CP370
All displays on the same network need the same compatible LightHouse version. LightHouse 4 and 5 must not be mixed; first-generation Axiom/Axiom+/Pro/XL remain on LightHouse 4.
The module requires its own power supply and a suitable transducer. This record documents the module-to-display connection; the transducer is selected separately.
Regional EMC restrictions for the CP370 transducer still require a separate check. This record covers only the module-to-display network connection and does not automatically approve a transducer.
Minimum CPx firmware: bundle v21.0.04 (application v21.0-22, platform v21.0.20), according to the LightHouse 5 peripheral table.
Network connections · 87504 Rev 1
Hardware and software compatibility · 81432 Rev 2
Networking constraints · 81432 Rev 2
CP370 — port and package contents · Official Raymarine documentation · checked 2026-10-11
RayNet — cables and compatible products · Official manufacturer page · checked 2026-10-10
CP370 CLEARPULSE SONAR MODULE · E70297
Axiom 2 without built-in sonar · Direct
NETWORK · Gigabit RayNet
Included with E70297:1 × A62361 — Raynet (F) to Raynet (F) cable - 2m
Functions: Conventional sonar up to 1 kW through CP370
All displays on the same network need the same compatible LightHouse version. LightHouse 4 and 5 must not be mixed; first-generation Axiom/Axiom+/Pro/XL remain on LightHouse 4.
The module requires its own power supply and a suitable transducer. This record documents the module-to-display connection; the transducer is selected separately.
Regional EMC restrictions for the CP370 transducer still require a separate check. This record covers only the module-to-display network connection and does not automatically approve a transducer.
Minimum CPx firmware: bundle v21.0.04 (application v21.0-22, platform v21.0.20), according to the LightHouse 5 peripheral table.
Network connections · 87504 Rev 1
Hardware and software compatibility · 81432 Rev 2
Networking constraints · 81432 Rev 2
CP370 — port and package contents · Official Raymarine documentation · checked 2026-10-11
RayNet — cables and compatible products · Official manufacturer page · checked 2026-10-10
Functions & interfaces
Bottom imaging · Fish detection
Technical specifications
Equipment type
Sonar modules
Protection against water
IPx6
Operating temperature
-10°C to +55°C
Transmit power
Up to 1 KW RMS
Frequency
50 kHz and 200 kHz
Depth range
0.9 m to 1524 m
Connections
Power supply, RayNet 10/100 Mbit/s, transducer connection
Dimensions
Height: 205.6 mm, Width: 299.4 mm, Depth: 84.4 mm
Weight
1.44 kg
Consumption
30.6 W (Maximum)
Current
3 A RMS
Nominal power supply
12 V dc / 24 V dc
Operating voltage range
10.8 V dc to 31.2 V dc
Selection & compatibility
This model is included in our catalogue. The exact configuration, compatibility and supply availability are confirmed when you contact us.
Browse the equipment
Kit contents, interfaces and required accessories are checked for the exact part number. Connection to another system does not mean all functions are built in.
Is it right for your vessel?
Tell us about your vessel, existing equipment and requirements. Elmare will help you choose the right configuration.
Request information by email ↗
+30 210 400 2538
Elmare · 1 Proussis Street, Keratsini