Raymarine M265LM D In Hull Low-Medium Transducer
Home / Equipment catalogue / Fishfinders & Sonar / Raymarine M265LM D In Hull Low-Medium Transducer
Raymarine · Code A80038
Transducers · Transducer
Fishfinders & Sonar
Discover the product
transducer Raymarine M265LM, for internal mounting in the hull. Part number A80038 identifies the specific connection and installation version.
Compatible equipment
Documented connections for specific catalogue codes, including parts, requirements and manufacturer sources. Selected equipment ranges are covered; an unlisted combination does not imply incompatibility. Each connection path is assessed separately and is not a complete installation design.
5 documented connections · Sources checked: 2026-10-11
Explore connections, components & diagrams ↗
Equipment connection guide ↗
M265LM D In Hull Low-Medium Transducer · A80038
Axiom 2 Pro RVM · Direct
1 kW sonar · 11-pin
No additional adapter is required for this connection.
Functions: CHIRP sonar
Electrical compatibility does not confirm suitability for the hull. Check material, deadrise and mounting position in the transducer guide.
Applies to this specific Raymarine code with its factory cable. Another version or code of the same model requires a separate check.
Connects to the 1 kW / 11-pin input; it does not use the RV/RVM input.
Axiom 2 Pro RVM — transducers by port · 87443 Rev 7
CHIRP — exact codes and required cables · 87443 Rev 7
M265LM D In Hull Low-Medium Transducer · A80038
RVM1600 · Direct
CHIRP · 11-pin
No additional adapter is required for this connection.
Functions: CHIRP sonar
Electrical compatibility does not confirm suitability for the hull. Check material, deadrise and mounting position in the transducer guide.
This connection applies to the exact Raymarine code with its factory cable.
The module needs a separate power supply and a compatible display through RayNet; this path describes the transducer-to-module connection.
CHIRP transducers · 87436 Rev 2
Required cables — CHIRP transducers · 87436 Rev 2
M265LM D In Hull Low-Medium Transducer · A80038
RVX1000 · Direct
CHIRP · 11-pin
No additional adapter is required for this connection.
Functions: CHIRP sonar
Electrical compatibility does not confirm suitability for the hull. Check material, deadrise and mounting position in the transducer guide.
This connection applies to the exact Raymarine code with its factory cable.
The module needs a separate power supply and a compatible display through RayNet; this path describes the transducer-to-module connection.
CHIRP transducers · 87349 Rev 3
Required cables — CHIRP transducers · 87349 Rev 3
M265LM D In Hull Low-Medium Transducer · A80038
Axiom 2 RV · Through a module
NETWORK · Gigabit RayNet
Additionally required:1 × E70665 — RVM1600 RealVision Black Box Sonar
Included with E70665:1 × A62361 — Raynet (F) to Raynet (F) cable - 2m
Functions: CHIRP sonar
Electrical compatibility does not confirm suitability for the hull. Check material, deadrise and mounting position in the transducer guide.
This connection applies to the exact Raymarine code with its factory cable.
The module needs a separate power supply and a compatible display through RayNet; this path describes the transducer-to-module connection.
All displays on the same network need the same compatible LightHouse version. LightHouse 4 and 5 must not be mixed; first-generation Axiom/Axiom+/Pro/XL remain on LightHouse 4.
The transducer connects to RVM1600, not to the display. The module requires independent power.
RVM1600 firmware now uses independent numbering from LightHouse. Check the compatible version in the peripheral update package.
Network connections · 87504 Rev 1
Hardware and software compatibility · 81432 Rev 2
Compatible peripheral product software · 81432 Rev 2
Networking constraints · 81432 Rev 2
RayNet — cables and compatible products · Official manufacturer page · checked 2026-10-10
CHIRP transducers · 87436 Rev 2
Required cables — CHIRP transducers · 87436 Rev 2
M265LM D In Hull Low-Medium Transducer · A80038
Axiom 2 without built-in sonar · Through a module
NETWORK · Gigabit RayNet
Additionally required:1 × E70665 — RVM1600 RealVision Black Box Sonar
Included with E70665:1 × A62361 — Raynet (F) to Raynet (F) cable - 2m
Functions: CHIRP sonar
Electrical compatibility does not confirm suitability for the hull. Check material, deadrise and mounting position in the transducer guide.
This connection applies to the exact Raymarine code with its factory cable.
The module needs a separate power supply and a compatible display through RayNet; this path describes the transducer-to-module connection.
All displays on the same network need the same compatible LightHouse version. LightHouse 4 and 5 must not be mixed; first-generation Axiom/Axiom+/Pro/XL remain on LightHouse 4.
The transducer connects to RVM1600, not to the display. The module requires independent power.
RVM1600 firmware now uses independent numbering from LightHouse. Check the compatible version in the peripheral update package.
Network connections · 87504 Rev 1
Hardware and software compatibility · 81432 Rev 2
Compatible peripheral product software · 81432 Rev 2
Networking constraints · 81432 Rev 2
RayNet — cables and compatible products · Official manufacturer page · checked 2026-10-10
CHIRP transducers · 87436 Rev 2
Required cables — CHIRP transducers · 87436 Rev 2
Functions & interfaces
Transducer
Technical specifications
Equipment type
Depth transducers
Reference maximum depth (ft)
3,000 (L) / 1,500 (M)
Frequency (kHz)
42-65 / 85-135
Beam width
25° / 16° (L) / 16° / 11° (M)
Mounting
In-hull
Material
Urethane
RMS power
1kW
Measurements
Depth
Hull material
Fibreglass
Cable length
10 m
Hull angle
0 - 30°
Selection & compatibility
This model is included in our catalogue. The exact configuration, compatibility and supply availability are confirmed when you contact us.
Browse the equipment
Kit contents, interfaces and required accessories are checked for the exact part number. Connection to another system does not mean all functions are built in.
Is it right for your vessel?
Tell us about your vessel, existing equipment and requirements. Elmare will help you choose the right configuration.
Request information by email ↗
+30 210 400 2538
Elmare · 1 Proussis Street, Keratsini