Raymarine Short Arm Vane Transducer supplied with 30m (97.5’) Cable
Home / Equipment catalogue / Instruments & Networks / Raymarine Short Arm Vane Transducer supplied with 30m (97.5’) Cable
Raymarine · Code E22078
Instruments & Sensors · Vessel data
Instruments & Networks
Discover the product
Instrument or sensor Raymarine Short Arm Vane Transducer supplied with 30m (97.5’) Cable for monitoring vessel data. The connection and required additional equipment depend on the specific version E22078.
Compatible equipment
Documented connections for specific catalogue codes, including parts, requirements and manufacturer sources. Selected equipment ranges are covered; an unlisted combination does not imply incompatibility. Each connection path is assessed separately and is not a complete installation design.
9 documented connections · Sources checked: 2026-10-11
Explore connections, components & diagrams ↗
Equipment connection guide ↗
Short Arm Vane Transducer supplied with 30m (97.5’) Cable · E22078
iTC-5 · Direct
Analogue transducer terminals
No additional adapter is required for this connection.
Functions: Apparent wind
This match applies to the analogue version of the exact code. iTC-5 is installed on the SeaTalk NG backbone.
Calibration requires a compatible display. i40/i50/i60 cannot calibrate transducers through iTC-5.
Analog wind vane transducers · 87138 Rev 5
Transducer calibration compatibility · 87138 Rev 5
Transducer calibration incompatibility · 87138 Rev 5
Short Arm Vane Transducer supplied with 30m (97.5’) Cable · E22078
i70s · Through a module
SeaTalk NG backbone
Shared SeaTalk NG network with separate branches. A powered and terminated backbone is required; this list is not a wiring sequence.
Additionally required:1 × E70010 — iTC-5 Instrument Transducer Converter
Included with E70327:1 × A06038 — Spur Cable 400mm
Functions: Apparent wind
A powered, correctly terminated SeaTalk NG backbone is required. iTC-5 connects to the backbone; it is not a direct transducer-to-i70s cable.
Calibration is performed from i70s. Backbone components depend on the existing network.
Analog wind vane transducers · 87138 Rev 5
Transducer calibration compatibility · 87138 Rev 5
Short Arm Vane Transducer supplied with 30m (97.5’) Cable · E22078
i60 Wind · Direct
Analogue transducer input
No additional adapter is required for this connection.
Functions: Apparent wind speed and angle
The factory cable is included with the transducer. True wind requires additional vessel-speed data.
Wind transducers — i60 and iTC-5 · Official manufacturer page · checked 2026-10-10
Short Arm Vane Transducer supplied with 30m (97.5’) Cable · E22078
i50 Depth + i50 Speed + i60 Wind · pack · Direct
Pack i60 Wind · analogue transducer input
No additional adapter is required for this connection.
Functions: Apparent wind speed and angle
The factory cable is included with the transducer. True wind requires additional vessel-speed data.
T70584 pack includes: 1 × i50 Depth, 1 × i50 Speed, 1 × i60 Wind, 1 × short-arm wind transducer, 1 × ST900/P120 speed/temperature transducer, 1 × P319 depth transducer.
This path applies to the i60 Wind in the pack. Check the transducers already supplied before selecting a replacement or additional equipment; included items do not need to be purchased again.
Alternative analogue transducers are intended for the instrument’s corresponding input; they are not all connected to the same input simultaneously.
Wind transducers — i60 and iTC-5 · Official manufacturer page · checked 2026-10-10
Short Arm Vane Transducer supplied with 30m (97.5’) Cable · E22078
i50 Tridata + i60 Wind · pack · Direct
Pack i60 Wind · analogue transducer input
No additional adapter is required for this connection.
Functions: Apparent wind speed and angle
The factory cable is included with the transducer. True wind requires additional vessel-speed data.
T70585 pack includes: 1 × i50 Tridata, 1 × i60 Wind, 1 × short-arm wind transducer, 1 × ST900/P120 speed/temperature transducer, 1 × P319 depth transducer.
This path applies to the i60 Wind in the pack. Check the transducers already supplied before selecting a replacement or additional equipment; included items do not need to be purchased again.
Alternative analogue transducers are intended for the instrument’s corresponding input; they are not all connected to the same input simultaneously.
Wind transducers — i60 and iTC-5 · Official manufacturer page · checked 2026-10-10
Short Arm Vane Transducer supplied with 30m (97.5’) Cable · E22078
i60 Wind · short-arm transducer pack · Direct
Pack i60 Wind · analogue transducer input
No additional adapter is required for this connection.
Functions: Apparent wind speed and angle
The factory cable is included with the transducer. True wind requires additional vessel-speed data.
E70150 pack includes: 1 × i60 Wind, 1 × short-arm wind transducer.
This path applies to the i60 Wind in the pack. Check the transducers already supplied before selecting a replacement or additional equipment; included items do not need to be purchased again.
Alternative analogue transducers are intended for the instrument’s corresponding input; they are not all connected to the same input simultaneously.
Wind transducers — i60 and iTC-5 · Official manufacturer page · checked 2026-10-10
View all 9 connections in the guide ↗
Functions & interfaces
Vessel data
Technical specifications
Equipment type
Instruments & Sensors
Selection & compatibility
This model is included in our catalogue. The exact configuration, compatibility and supply availability are confirmed when you contact us.
Browse the equipment
Kit contents, interfaces and required accessories are checked for the exact part number. Connection to another system does not mean all functions are built in.
Is it right for your vessel?
Tell us about your vessel, existing equipment and requirements. Elmare will help you choose the right configuration.
Request information by email ↗
+30 210 400 2538
Elmare · 1 Proussis Street, Keratsini