Raymarine i40/50 P65 Depth, Speed, Temperatue Transom Mount Transducer
Home / Equipment catalogue / Fishfinders & Sonar / Raymarine i40/50 P65 Depth, Speed, Temperatue Transom Mount Transducer
Raymarine · Code E26006-PZ
Transducers · Transducer
Fishfinders & Sonar · Instruments & Networks
Discover the product
transducer Raymarine i40, for mounting transom mount. Part number E26006-PZ identifies the specific connection and installation version.
Compatible equipment
Documented connections for specific catalogue codes, including parts, requirements and manufacturer sources. Selected equipment ranges are covered; an unlisted combination does not imply incompatibility. Each connection path is assessed separately and is not a complete installation design.
15 documented connections · Sources checked: 2026-10-11
Explore connections, components & diagrams ↗
Equipment connection guide ↗
i40/50 P65 Depth, Speed, Temperatue Transom Mount Transducer · E26006-PZ
iTC-5 · Direct
Analogue transducer terminals
No additional adapter is required for this connection.
Functions: Depth · Speed through water · Water temperature
This match applies to the analogue version of the exact code. iTC-5 is installed on the SeaTalk NG backbone.
Calibration requires a compatible display. i40/i50/i60 cannot calibrate transducers through iTC-5.
Avoid operating another sonar at the same frequency as the instrument depth transducer simultaneously.
Analog Depth, Speed and Temperature (DST) transducers · 87138 Rev 5
Transducer calibration compatibility · 87138 Rev 5
Transducer calibration incompatibility · 87138 Rev 5
i40/50 P65 Depth, Speed, Temperatue Transom Mount Transducer · E26006-PZ
i70s · Through a module
SeaTalk NG backbone
Shared SeaTalk NG network with separate branches. A powered and terminated backbone is required; this list is not a wiring sequence.
Additionally required:1 × E70010 — iTC-5 Instrument Transducer Converter
Included with E70327:1 × A06038 — Spur Cable 400mm
Functions: Depth · Speed through water · Water temperature
A powered, correctly terminated SeaTalk NG backbone is required. iTC-5 connects to the backbone; it is not a direct transducer-to-i70s cable.
Calibration is performed from i70s. Backbone components depend on the existing network.
Analog Depth, Speed and Temperature (DST) transducers · 87138 Rev 5
Transducer calibration compatibility · 87138 Rev 5
i40/50 P65 Depth, Speed, Temperatue Transom Mount Transducer · E26006-PZ
i50 Depth · Direct
Analogue transducer input
No additional adapter is required for this connection.
Functions: Depth
Connect the specific analogue version to the corresponding terminals. The display shows only measurements supported by that display model.
Check hull, deadrise, wiring and calibration against the transducer / instrument guide.
Instrument Depth, Speed and Temperature (DST) transducers · 87420 Rev 2
i40/50 P65 Depth, Speed, Temperatue Transom Mount Transducer · E26006-PZ
i50 Speed · Direct
Analogue transducer input
No additional adapter is required for this connection.
Functions: Speed through water · Water temperature
Connect the specific analogue version to the corresponding terminals. The display shows only measurements supported by that display model.
Check hull, deadrise, wiring and calibration against the transducer / instrument guide.
Instrument Depth, Speed and Temperature (DST) transducers · 87420 Rev 2
i40/50 P65 Depth, Speed, Temperatue Transom Mount Transducer · E26006-PZ
i50 Tridata · Direct
Analogue transducer input
No additional adapter is required for this connection.
Functions: Depth · Speed through water · Water temperature
Connect the specific analogue version to the corresponding terminals. The display shows only measurements supported by that display model.
Check hull, deadrise, wiring and calibration against the transducer / instrument guide.
Instrument Depth, Speed and Temperature (DST) transducers · 87420 Rev 2
i40/50 P65 Depth, Speed, Temperatue Transom Mount Transducer · E26006-PZ
i50 Depth · P319 pack · Direct
Pack i50 Depth · analogue transducer input
No additional adapter is required for this connection.
Functions: Depth
Connect the specific analogue version to the corresponding terminals. The display shows only measurements supported by that display model.
Check hull, deadrise, wiring and calibration against the transducer / instrument guide.
E70148 pack includes: 1 × i50 Depth, 1 × P319 depth transducer.
This path applies to the i50 Depth in the pack. Check the transducers already supplied before selecting a replacement or additional equipment; included items do not need to be purchased again.
Alternative analogue transducers are intended for the instrument’s corresponding input; they are not all connected to the same input simultaneously.
Instrument Depth, Speed and Temperature (DST) transducers · 87420 Rev 2
View all 15 connections in the guide ↗
Functions & interfaces
Transducer
Technical specifications
Equipment type
Depth transducers
Series
i40
Selection & compatibility
This model is included in our catalogue. The exact configuration, compatibility and supply availability are confirmed when you contact us.
Browse the equipment
Kit contents, interfaces and required accessories are checked for the exact part number. Connection to another system does not mean all functions are built in.
Is it right for your vessel?
Tell us about your vessel, existing equipment and requirements. Elmare will help you choose the right configuration.
Request information by email ↗
+30 210 400 2538
Elmare · 1 Proussis Street, Keratsini